49151 Hand Taps and Round Dies Set of 43 | Völkel

– non abrasive material up to 900 N/mm²
– unalloyed and low alloyed steel
– for through and blind holes
– for thread cutting by hand
– the most popular dimensions in one case
– HSS-E Hand taps acc. to DIN 352
– HSS-E Round dies acc. to DIN 223 (DIN EN 22568)

Constituents:
1) Set of 3 HSS-E Hand taps M3 (57326)
2) Set of 3 HSS-E Hand taps M4 (57330)
3) Set of 3 HSS-E Hand taps M5 (57334)
4) Set of 3 HSS-E Hand taps M6 (57338)
5) Set of 3 HSS-E Hand taps M8 (57342)
6) Set of 3 HSS-E Hand taps M10 (57346)
7) Set of 3 HSS-E Hand taps M12 (57350)
8) HSS Twist drill 2,50 mm (M3)
9) HSS Twist drill 3,30 mm (M4)
10) HSS Twist drill 4,20 mm (M5)
11) HSS Twist drill 5,00 mm (M6)
12) HSS Twist drill 6,80 mm (M8)
13) HSS Twist drill 8,50 mm (M10)
14) HSS Twist drill 10,20 mm (M12)
15) HSS-E Round die M3 (57426)
16) HSS-E Round die M4 (57430)
17) HSS-E Round die M5 (57434)
18) HSS-E Round die M6 (57438)
19) HSS-E Round die M8 (57442)
20) HSS-E Round die M10 (57446)
21) HSS-E Round die M12 (57450)
22) Adjustable tap wrench, zinc die cast No. 1 (13010)
23) Adjustable tap wrench, zinc die cast No. 2 (13020)
24) Die stock, zinc die cast 20×5 mm (15002)
25) Die stock, zinc die cast 20×7 mm (15003)
26) Die stock, zinc die cast 25×9 mm (15004)
27) Die stock, zinc die cast 30×11 mm (15005)
28) Die stock, zinc die cast 38×14 mm (15007)
29) Tap holder with ratchet, size 1 (10001)